New Features | Features | Add-On Products | Product Literature | System Requirements

SureSync Support: Known Issues

The latest version of SureSync is 5.0.27. All problems and issues reported for prior versions have been resolved and corrected.

Software Pursuits makes every effort to resolve any issues with SureSync as quickly as possible. Because we know that fixes can not always be instantaneous, we always keep our users informed of any known problems or issues with SureSync that we are working to fix for our next release. For additional information on our release policy click here.

We send an e-mail notification to users when a critical error is found or when a significant version change is released. (You gave us your e-mail address when you downloaded SureSync. If you suspect that we do not have your current email address, please contact our support staff.) We will not release your address to other companies. Please see our Privacy policy.

Below is our current list of known issues for all versions of SureSync. Unless otherwise indicated, the problems listed for each earlier version were fixed in the later versions. Patches are generally not provided for prior versions, but upgrading to the latest version is even easier than applying a patch.

You can determine your SureSync version by accessing Help, About when running any of the SureSync programs.

The last portion of the version number reflects the application of fixes and patches. Feature changes usually change the middle section of the version number.

Back to prior page

Known Issues in All Versions

This section has known issues that cross versions, such as conflicts with other software products or system requirements.

Required Microsoft Components

SureSync 5.0 requires MDAC 2.8, Jet SP8, .NET Framework 2.0, and Windows Installer 3.0 or newer versions of each. The installer will check to see if your system meets these requirements. If it does not it will offer to install them for you.

Zip Magic

If you are using ZipMagic to handle your zip files and are allowing ZipMagic to display zip files as folders, SureSync will be unable to copy those files. If you turn off ZipFolders then the files will copy as expected.

In order to display the zip files as folders, ZipMagic must somehow intercept the standard actions such as opening a file and reissue them as if you were working with a folder. This command change prevents SureSync from being able to properly open, copy and rename files.

It is our guess that the makers of ZipMagic recognize this issue. There are two ways to circumvent this issue. You can turn off ZipFolders for SureSync only or you can turn off ZipFolders during the time you run your synchronization.

To turn off the ZipFolders for SureSync's file synchronization engine. You can open the ZipMagic control panel, select the ZipFolders choice, and go to Applications. Click 'Add' on the Control Panel and browse to your SureSync folder and choose SPIFiles.exe from the file list. Then click 'Add' on the Add New Application dialog. Click 'Done' and 'OK' to save the new settings.

Or to turn ZipFolders off at a specific time, you can open the ZipMagic control panel, select the ZipFolders choice, and go to Schedule it allows you to schedule times for the ZipFolder option to be disabled. The text on the panel says "this can be useful for automatic activities done overnight". This implies that SureSync is not the only product that can not work with the ZipFolders feature on.

Note: The only files that SureSync will not copy if ZipFolders is turned on are the zip files. All other files should copy normally.

Return to top of page

Known Issues in Latest Version (5.0.27)

Version 5.0.27 was posted on June 27, 2008.

This version contains all patches to previous versions as well as new fixes and features (see the ReadMe file for details). All issues listed for prior versions have been resolved.

There are no patches issued for this version at this time. We will report known issues as they come up.

If you have any problems not listed here, please contact our Support Team.

Return to top of page

SureSync 5.0.26 Known Issues

Version 5.0.26 was posted on June 20, 2008.

Database

Database copies now verify and copy valid file history. This has been added in 5.0.27.
Orphaned file history was not bieng correctly purged. This could result in database bloat. This has been fixed in 5.0.27.

Preview

Constraint errors would occur if you performed a Preview and then used the Actions tab. This has been fixed in 5.0.27.
Preview was not correctly showing subfolders. This has been fixed in 5.0.27.

SyncStatus

The "wait until" time listed in SyncStatus when a Real-Time Monitor was "between intervals" was off by time zone calcuations. This has been fixed in 5.0.27.

Return to top of page

SureSync 5.0.25 Known Issues

Version 5.0.25 was posted on March 7, 2008.

Windows 2008 is now supported. This support has been added in 5.0.26.

Database

Upgrading or copying a large SureSync database could fail due to a "too many locks" error. This has been fixed in 5.0.26.

Desktop

When the browse panel failed to load a system icon, it was generating an error rather than displaying a generic icon. This has been fixed in 5.0.26.
If a user did not have permissions to view the first group folder listed in the SureSync desktop then the desktop wouldn't give permission to any of the other group folders listed. This has been fixed in 5.0.26.
"This row has been removed from the table" errors could occur when opening or refreshing the SureSync desktop. This has been fixed in 5.0.26.
Corrections have been made to the Archive Restore wizard. This has been fixed in 5.0.26.

File Synchronization

It was possible to lose file history if running a multi-mirror and the rule selected subfolders or did not select by folder attribute. This has been fixed in 5.0.26.
Errors should not be reported if file sizes differ with the same dates on a Recent Master Copy rule but were being reported. This has been fixed in 5.0.26.
If a root path is created by a job, SureSync now purges history to avoid deleting files from the other pre-existing paths in a multi-mirror. This has been fixed in 5.0.26.
When adding a path to an existing multi-mirror, if the new path had an old version of a file it was overwriting the more current version on the existing paths. This has been fixed in 5.0.26.
SyncCmd was not always starting jobs even if the Scheduler was running. This has been fixed in 5.0.26.
Violation of primary key constraint errors could occur when trying to add history for a new subfolder. This has been fixed in 5.0.26.
In some cases, when the source file is on a Windows 2000 machine, SureSync would issue an erroneous 'file changed since intial scan' message and would not move past the file. This has been fixed in 5.0.26.

Preview

If Preview settings on the Relation was set to "Only actions and errors" and the Relation was previewed, there would be options on the filter tab which were grayed out and shouldn't be. This has been fixed in 5.0.26.
The preview panel could produce a constaint exception error. This has been fixed in 5.0.26.

Real-Time Monitors

Intervals were not always starting on time after being between intervals. This has been fixed in 5.0.26.
A real-time monitor was not always increasing the size of the NTFS change journal when encountering journals which were sized to small. This resulted in unnecessary rescans. This has been fixed in 5.0.26.
Rename errors were being reported unnecessarily for real-time monitors. This has been fixed in 5.0.26.
Folder renames could turn into full copies if a folder was added and then immediately moved or renamed. This has been fixed in 5.0.26.
Using Advanced Open File Support with a real-time monitor when copying large files could result in a full file copy not being made. This has been fixed in 5.0.26.
The change journal was not being read after a full rescan. This has been fixed in 5.0.26.
Subfolders were being scanned unnecessarily on some folder events. This has been fixed in 5.0.26.

Scheduler

More robust error recovery for the Scheduler starting before SQL Server fully started has been added. This has been fixed in 5.0.26.

SyncStatus

The SPIAgent used by SyncStatus was not always being properly disconnected so other agents attepmting to communicate with it would receive a timeout error. This has been fixed in 5.0.26.

Return to top of page

SureSync 5.0.24 Known Issues

Version 5.0.24 was posted on December 7, 2007.

ArchiveSync

When trying to restore from the preview of an Archive Relation, if you select "All paths except source" as the destination you would receive an error stating "you cannot select an archive as a destination for a Restore from an Archive." This has been fixed in 5.0.25.
If a file being archived is zero bytes and the Relation uses CRC on that file, the file will fail validation and not be archived. This has been fixed in 5.0.25.

Desktop

The run time on the Relation statistics tab was being converted from UTC time incorrectly. This has been fixed in 5.0.25.
Could not browse a new root path if the path required a user ID and password in path options. It was possible to receive a Null Reference Exception. This has been fixed in 5.0.25.
When refreshing a node in the SureSync desktop after starting or stopping a job it was possible to receive a record no longer exists in table error. This has been fixed in 5.0.25.
If the alert user panel was launched from the Options panel it would not close properly. This has been fixed in 5.0.25.

File Synchronization

File changed during processing errors could occur. Usually these messages would occur when copying files from a CD. It is possible for them to occur in some other select cases. This has been fixed in 5.0.25.
Processing open files without Advanced Open File Support may report that the file has changed during processing. This has been fixed in 5.0.25.
If a multi-mirror relation has "add root path if it doesn't exist" selected in Path Options for an existing path and that path is added later on, files can be deleted unexpected. This has been fixed in 5.0.25.
Using Advanced Open File Support on some systems may cause open files to be seen as changed during processing and not copied. This has been fixed in 5.0.25.
If a folder is added to a multi-mirror, history was not being updated completely until the second time processing the folder. This has been fixed in 5.0.25.
A schedule setup to retry after errors may not always run on time. This has been fixed in 5.0.25.
A schedule setup to repeat throughout the day until midnight would not reschedule retries properly when the whole job failed. This has been fixed in 5.0.25.
"Unable to copy security" could be reported when renaming a file. This has been fixed in 5.0.25.

Real-Time Monitors

If an interval end time leads into a between intervals space (instead of another interval) that interval may not end on time. This has been fixed in 5.0.25.
Renaming a file in a folder that is being monitored may occasionally fail resulting in two copies of the file (one with the old name and one with the new name). This has been fixed in 5.0.25.

Return to top of page

SureSync 5.0.23 Known Issues

Version 5.0.23 was posted on December 4, 2007.

SyncStatus

Loop would occur in SyncStatus (and possibly other components) if used on a machine that is not in its local database. This happens the first time that SyncStatus is used. This has been fixed in 5.0.24.

Return to top of page

SureSync 5.0.22 Known Issues

Version 5.0.22 was posted on October 26, 2007.

Desktop

If a user with an apostrophe (single quote) in their username uses SureSync the application would generate a syntax error. This has been fixed in 5.0.23.

File Synchronization

Correction to SuperOpen with standard open files Rules. This has been fixed in 5.0.23.
Reset of source archive flag failed if VSS was used. This has been fixed in 5.0.23.
Performance improvements for file copies made via UNC path. This has been fixed in 5.0.23.
File changed during processing errors could be reported when running from a Preview. This has been fixed in 5.0.23.
If SureSync is unable to retrieve volume information, the synchronization would report disk is full. This has been fixed in 5.0.23.

Real-Time Monitors

First run of a Multi-Mirror after a database upgrade from 4.1 was slow. This has been fixed in 5.0.23.
Error on BackupRead may be reported when encountering a busy file in a Real-Time Monitor. This has been fixed in 5.0.23.
Minor optimizations on Monitor event processing regarding folder rescans. This has been fixed in 5.0.23.
An error was reported if a source file changed during processing for a Real-Time Monitor when the message was not necessary. This has been fixed in 5.0.23.
Renames when paths are offline in a Real-Time Monitor could cause files to be added back. This has been fixed in 5.0.23.
Real-Time Monitor events chould be lost when paths are offline. This has been fixed in 5.0.23.
Renaming a folder and then quickly renaming it back to the original location with a Multi-Mirror rule in Real-Time could result in files being added back. This has been fixed in 5.0.23.
Retry times for open files for a Real-Time Monitor now use the same open file retry time as the Schedules. This has been fixed in 5.0.23.
Multi directional Real-Time Monitors will perform an automated full rescan at 1AM local time on the SureSync machine to correct history. This is a one time event. This has been fixed in 5.0.23.

SyncStatus

SyncStatus could report that files were being replaced when the files were actually being added. This has been fixed in 5.0.23.
Folder scan process was sometimes not displayed in SyncStatus. This has been fixed in 5.0.23.

Return to top of page

SureSync 5.0.21 Known Issues

Version 5.0.21 was posted on September 28, 2007.

Desktop

If creating a monitor using the wizard without a mouse, an error was generated when the wizard finished. This has been fixed in 5.0.22.

File Synchronization

File not found may be reported when adding a file and the file exists at the last moment. This has been fixed in 5.0.22.
Error when clearing source Archive flag if VSS is used on the file. This has been fixed in 5.0.22.
Performance was improved when creating thousands of folders. This has been fixed in 5.0.22.
Index out of range error may be reported when job cannot communicate with the SureSync desktop. This has been fixed in 5.0.22.
Netware files would report that they had changed during processing. This has been fixed in 5.0.22.
Root paths may be incorrectly dropped when a locked folder is encountered. This has been fixed in 5.0.22.

Real-Time Monitors

Eliminated unnecessary "path not found" error for monitors. This has been fixed in 5.0.22.
Monitor events may be lost for retries that occurred when a path was offline. This has been fixed in 5.0.22.

SPIAgent

When copying to a remote agent older than 5.0.21, files were not copied and temporary files were left behind. This has been fixed in 5.0.22.

Return to top of page

SureSync 5.0.20 Known Issues

Version 5.0.20 was posted on July 24, 2007.

Database

Could not copy a database to SQL, the SPI_Control table would not be recognized and the copy process would encounter errors. This has been fixed in 5.0.21.
When upgrading or copying a database, in some cases, SureSync would be unable to locate the SPI_Control table. This has been fixed in 5.0.21.

Desktop

The option to specify an amount of time to wait for a script to finish on the Scripts tab was not saving. This has been fixed in 5.0.21.
Concurrency errors could occur while using the SureSync desktop which would not clear until the desktop was restarted. This has been fixed in 5.0.21.
Copying a Relation would fail. This has been fixed in 5.0.21.
Occasionally when you have a Rule node selected in the SureSync desktop tree the property sheet and icon would display Relation information until the next refresh. This has been fixed in 5.0.21.

File Synchronization

Some unnecessary "Root Path Overlap" warnings were eliminated. Some warnings were not reported. This has been fixed in 5.0.21.
Better handling of a system shutdown. This has been fixed in 5.0.21.
Some "File changed during processing" exceptions were incorrectly reported as errors. This has been fixed in 5.0.21.
When editing an existing root path, SureSync may not check licensing information immediately and the job could error with an "unlicensed server" message. This has been fixed in 5.0.21.
SyncCmd now waits for a starting Scheduler properly. This has been fixed in 5.0.21.
Delta trace log messages were missing. This has been fixed in 5.0.21.

Real-Time Monitors

Monitor events could be lost after a path re-connect if it occurred between monitor intervals. This has been fixed in 5.0.21.
Stoping a job that had lost communication with a path wasn't working correctly. This has been fixed in 5.0.21.
Invalid parameter - Drive letter errors were possible if paths were lost from a Real-Time Monitor that was in between intervals. This has been fixed in 5.0.21.

SPIAgent

Performance improvements have been made when using the SPIAgent add-on over slow connections with large amounts of small files. This has been fixed in 5.0.21.

Return to top of page

SureSync 5.0.19 Known Issues

Version 5.0.19 was posted on May 17, 2007.

Database

A failure to open the SureSync database was not always properly reflected to the user. This has been fixed in 5.0.20.
The number of retries when the database gives the error "could not update, currently locked" has been increased. This has been fixed in 5.0.20.
If upgrading a SureSync 4.1 database to SureSync 5.0 you could receive a NullReference error. This has been fixed in 5.0.20.
SQL deadlock errors could occur in rare cases. This has been fixed in 5.0.20.
Minor database upgrade to support additional future functionality. This change has been made in 5.0.20

Desktop

Non-archive Relations should not be changed to Archive Relations. The desktop user interface has been correct to prevent this change from being made. This has been fixed in 5.0.20.
Interval overlap warning messages displayed incorrect days for the overlapping intervals. This has been fixed in 5.0.20.
The Scripts tab now follows the "convert to UNC path" option defined in Options when handling mapped drives entered into the form. This has been fixed in 5.0.20.

File Synchronization

Subscript out of range errors could occur after requeuing a file that didn't copy because it had changed since SureSync started processing the file. This has been fixed in 5.0.20.
Writing files to an FTP path would cause SyncFiles.exe to crash. This has been fixed in 5.0.20.
A timeout on a file read could cause the job to cancel. This has been fixed in 5.0.20.
Path UserIDs and passwords defined in Path Options were not used on local paths if defined. This has been fixed in 5.0.20.
Advanced Open File Support licenses were not correctly recognized for a multi-way rule. This has been fixed in 5.0.20.

Real-Time Monitors

Folder deletes for a Real-Time Monitor may not be fully processed. This has been fixed in 5.0.20.
Events in rapid sequence in a Real-Time Monitor could be ignored if the clocks on the machines were not synchronized. This has been fixed in 5.0.20.
Moving a folder from a directory structure being monitored with a Real-Time Monitor to a non-monitored location and then moving it back to a monitored location could in some instances result in events in that folder being ignored. This has been fixed in 5.0.20.
An index out of range error could occur when a monitor was reading a new set of queued events. This has been fixed in 5.0.20.

Scheduler

Occasionally specific jobs would stop running and would not be rescheduled until the SureSync Scheduler was stopped and restarted. This has been fixed in 5.0.20.

SyncStatus

SyncStatus could report a "key already exists" error when displaying progress. This has been fixed in 5.0.20.

Return to top of page

SureSync 5.0.18 Known Issues

Version 5.0.18 was posted on April 19, 2007.

Database

New column on the FileHistory table which was added in an earlier version may not have been filled in properly resulting in Null values in that column which could result in errors being raised. This has been fixed in 5.0.19.
Some data (long rule subfolder directory listings or file masks) would be truncated when the database was copied to a new database. This has been fixed in 5.0.19.

Desktop

When changing a schedule to run on specific weekdays or weeks of the month, after clicking apply the settings would be reset to default. This has been fixed in 5.0.19.

File Synchronization

It was possible to get a file lock count exceeded error when trying to purge the job log at the end of a job. This has been fixed in 5.0.19.
SPIAgent File Locking add-on released. This new add-on can be found in 5.0.19 and requires an additional license.

Scheduler

In some cases the Scheduler was not properly updating its queue after running a job and some jobs were being skipped. This has been fixed in 5.0.19.
Invalid parameter errors when the Scheduler used the agent to communicate. This has been fixed in 5.0.19.

Return to top of page

SureSync 5.0.17 Known Issues

Version 5.0.17 was posted on March 2, 2007.

Compatibility

SureSync is now compatible with Windows 2003 Service Pack 2 (with 5.0.18 or newer).
SureSync is now compatible with Windows Vista (with 5.0.18 or newer).
Advanced Open File Support (VSS) is now compatible with Windows 2003 Service Pack 2. This has been fixed in 5.0.18.
Advanced Open File Support (VSS) is now compatible with Windows Vista. This has been fixed in 5.0.18.

Database

Upgrading a SQL database from SureSync 4.1 to 5.0 could sometimes fail with a "cannot drop database" error. This has been fixed in 5.0.18.

Desktop

Fixed a desktop display issue where part of the Rule Wizard form was covering the "copy latest" checkbox. This has been fixed in 5.0.18.
If you changed just the port number in SPIAgent Setup the Save button was not becoming active. This has been fixed in 5.0.18.

File Synchronization

If a Relation has more than 19 paths it will fail with a "not enough paths" error message. This has been fixed in 5.0.18.
Relative date ranges on a rule would generate an error if the value was too large. This has been fixed in 5.0.18.
NullReference errors could occur in ReadFileHistory. This has been fixed in 5.0.18.
Access Dates are now preserved on file copies if the option "Copy date created and Access date for files copied to this path" is checked in Path Options. This works for both source and destination paths. This has been fixed in 5.0.18.
A change of the inherited permissions flag was not always properly recognized. This has been fixed in 5.0.18.
NullReference errors could occur when trying to log an agent disconnect error during a file copy. This has been fixed in 5.0.18.
Changing a rule to use Advanced Open File Support would cause a license error the first time the Relation was run. This has been fixed in 5.0.18.

Preview

Preview would fail when overriding files with no actions. This has been fixed in 5.0.18.
Preview would return a null reference error when overriding from the tree view in some instances. This has been fixed in 5.0.18.
Running a Preview when you have a rule selected in the desktop tree can result in a "this row has been removed from a table and does not have any data" error. This has been fixed in 5.0.18.

Real-Time Monitors

Performance improvements have been made on folder renames with Real-Time Monitors. This has been fixed in 5.0.18.

Scheduler

Scheduler could return a "key was not present in the dictionary" error in rare cases. This has been fixed in 5.0.18.
The Scheduler control panel in the desktop now works properly with Windows Vista. This has been fixed in 5.0.18.
It was possible for the Scheduler to return a "System.InvalidOperationException: Collection was modified; enumeration operation might not execute." error in the Event Log and then fail to launch jobs. This has been fixed in 5.0.18.

SyncStatus

SyncStatus may get an invalid parameter error "data exceeds SPIAgent buffer size" when launching. This has been fixed in 5.0.18.
SyncStatus could occasionally get caught in a loop (become unresponsive) when adding a server or trying to talk to an agent. This has been fixed in 5.0.18.

Return to top of page

SureSync 5.0.16 Known Issues

Version 5.0.16 was posted on February 6, 2007.

Database

Timeouts could occur on database upgrades. This has been fixed in 5.0.17.

Desktop

If you added a machine name in SPIAgent Settings but canceled before saving it would error out and would have problems until the desktop was restarted. This has been fixed in 5.0.17.
If there was a machine name in SPIAgent Settings that sorted before the “Add Machine Name” item in the drop down list then the “Add Machine Name” would no longer function properly. This has been fixed in 5.0.17.
In a few cases the desktop tree was constantly blinking with refreshes. This has been fixed in 5.0.17.

File Synchronization

Null Reference Exception "Object reference not set to an instance of an object" was occurring in some instances when trying to get NextFile. This has been fixed in 5.0.17.
Loop opening A FTP file if the open fails with certain errors. This has been fixed in 5.0.17.

Preview

Database records from a Preview were not always cleared when the job was run from Preview. This has been fixed in 5.0.17.

Real-Time Monitors

Filtering by file size on Monitors failed to process events on the next interval which were filtered out of the previous interval. This has been fixed in 5.0.17.

Scheduler

The SureSync Scheduler was logging errors and sending alerts for a Schedule being missed when there was actually no problem. This has been fixed in 5.0.17.

SyncStatus

SyncStatus was giving "Invalid Parameter" errors when the user requesting status was a member of a large number of Windows security groups. This has been fixed in 5.0.17.

Return to top of page

SureSync 5.0.15 Known Issues

Version 5.0.15 was posted on January 3, 2007.

Database

Database performance improvements have been made for previews and multi-directional jobs. This has been fixed in 5.0.16.
Performance improvements have been made for databases which contain hundreds of root paths. This has been fixed in 5.0.16.
"Invalid Cast Exception" error messages could occur when creating a new database. This has been fixed in 5.0.16.

Desktop

Japanese language files will now update to new versions properly. This has been fixed in 5.0.16.
References to the local machine registry key have been removed. This has been fixed in 5.0.16.
When first bring up the archive rule dialog, the "recent versions to keep" textbox was not being updated. This has been fixed in 5.0.16.
Property updates could be lost during a refresh of items in the user interface. This has been fixed in 5.0.16.

File Synchronization

Erroneous "attempted to read or write from protected memory" errors could occur when trying to access a FTP root when the user does not have appropriate permissions. This has been fixed in 5.0.16.
User name and password supplied in Path Options was not always submitted to non-Windows paths which would lead to problems accessing that non-Windows path. This has been fixed in 5.0.16.

Real-Time Monitors

Security changes in a multi-directional rule will now use the event location as the source instead of comparing file access dates. This has been fixed in 5.0.16.
Database connection closed errors can occur between monitor intervals at midnight. This has been fixed in 5.0.16.
"Configuration Registry Key is Invalid" errors could occur. This has been fixed in 5.0.16.

Scheduler

In some cases every day schedules were being incorrectly rescheduled two days later instead of to the next day. This has been fixed in 5.0.16.

SyncStatus

If displaying status of a job when the SureSync Scheduler shuts down SyncStatus could generate an "index out of range" error. This has been fixed in 5.0.16.

Return to top of page

SureSync 5.0.14 Known Issues

Version 5.0.14 was posted on December 11, 2006.

Database

When upgrading a SQL database to 5.0 it was possible for an error "The file named is already in use." to occur. This has been fixed in 5.0.15.

Desktop

When you edit a monitor interval and use the "Select All" button you would receive a "The value of '7' is not valid for index." error. This has been fixed in 5.0.15.
When you edit a root path for a Relation and check the button to select a path in the tree, the nodes of the freshly expanded tree would be out of order. This has been fixed in 5.0.15.
Changing a path on the Roots tab of a Rule would not always activate the "Apply" and "Cancel" buttons. This has been fixed in 5.0.15.
Japanese language translations updated. This has been fixed in 5.0.15.
Users were able to create jobs in the SureSync database that they lacked permission to access once created. A user must have Modify or greater permissions to create a job. This has been fixed in 5.0.15.
New Restore Relations were not placed in the proper group folder. This has been fixed in 5.0.15.
When a Scheduler rescheduled a Schedule or put it on hold it wasn't always properly notifying the desktop. This could cause concurrency errors when a user tried to update properties for the changed Schedule. This has been fixed in 5.0.15.

File Archiving

Archive licensing was not properly recognized for a machine that is both an Archive source and destination. This has been fixed in 5.0.15.

File Synchronization

It was possible for "primary key violation" errors to occur on the Servers table of the SureSync database when running Real-Time Monitors. This has been fixed in 5.0.15.
Minor FTP corrections were made. This has been fixed in 5.0.15.

Preview

Preview performance improvements when a Multi-Mirror rule is used. This has been fixed in 5.0.15.

SyncStatus

If multiple Schedulers are running using the same database SyncStatus was showing all jobs under every server whether they were running there or not. This has been fixed in 5.0.15.

Return to top of page

SureSync 5.0.13 Known Issues

Version 5.0.13 was posted on November 10, 2006.

Desktop

The browse trees were not always being sorted properly. This has been fixed in 5.0.14.
Errors would occur when changing from a Multi-Mirror rule to a Mirror rule if you failed to set a source path. This has been fixed in 5.0.14.
If you delete and add a path to an existing relation (at the same time) and the deleted path causes a rule to be deleted, the changes to the paths would error out and would not let you save. This has been fixed in 5.0.14.
Fixes to the Japanese translations. This has been fixed in 5.0.14.

File Archiving

Archive delete events may be recorded out of sequence. This has been fixed in 5.0.14.

File Synchronization

If the agent was changed for a Root Path with history, the user was not being asked if history should be purged. This has been fixed in 5.0.14.
May have some data integrity problems with synchronizations with an FTP source and a non-FTP destination. This has been fixed in 5.0.14.
Jobs with root paths that used mapped drives (not UNC) were sometimes failing to find the path when the synchronization was run. This has been fixed in 5.0.14.

Preview

Constraint errors could occur on a preview or multi-mirror when a folder is missing. This has been fixed in 5.0.14.
Null reference errors could occur when performing overrides in the preview from the node tree. This has been fixed in 5.0.14.

Real-Time Monitors

In some cases when running a monitor using a SQL database the error "@paramRelationID is not a parameter for procedure DelQueueDups#" could occur. This has been fixed in 5.0.14.
When a user moves a file from a monitored folder to a folder excluded from the monitor by a rule, instead of removing the file from the matching paths on the other roots it would attempt an attribute change on the non-existing source file. This has been fixed in 5.0.14.
Undefined message 753 showing up in the job log when a monitor is connecting to an agent in some instances. This has been fixed in 5.0.14.
Violation of primary key constraint errors were possible when trying to write file history which could result in the monitor being canceled. This has been fixed in 5.0.14.

SyncStatus

Null reference errors could occur when SyncStatus was closed while SyncFiles was in the middle of sending a status update. This has been fixed in 5.0.14.

SureSync 5.0.12 Known Issues

Version 5.0.12 was posted on October 9, 2006.

Database

Upgrading a SQL database would error out if the database name contains a - (dash) character. This has been fixed in 5.0.13.

Desktop

The invert button on the Add/Edit Intervals form caused an error. This has been fixed in 5.0.13.
Displaying Archive Rules may generate an error when the Rule contains a value of zero days. This has been fixed in 5.0.13.
Errors could occur when browsing Rule Subfolders. This has been fixed in 5.0.13.
Opening database with hundreds of Relations or Paths was slow. This has been fixed in 5.0.13.

File Synchronization

Netware servers may show as unlicensed. This has been fixed in 5.0.13.
Insufficient disk space may be reported for Unix NFS servers. This has been fixed in 5.0.13.

Preview

Preview totals did not include files that just need security or attribute changes. This has been fixed in 5.0.13.
Obsolete history was not always being purged and this caused confusion in the preview display and constraint errors. This has been fixed in 5.0.13.

Return to top of page

SureSync 5.0.11 Known Issues

Version 5.0.11 was posted on September 13, 2006.

Database

There were problems upgrading databases which contained null values in some database fields. This has been fixed in 5.0.12.

Desktop

The toolbar button to display selected job log wasn't selecting the appropriate job. This has been fixed in 5.0.12.
Running jobs from the desktop could result in a job initialization failure and a "duplicate operand" error in some cases. This has been fixed in 5.0.12.
When browsing for a rule subfolder the checkboxes for which subfolders to include were not always correctly marked. This has been fixed in 5.0.12.
Turning off tool tips from the view menu didn't work. This has been fixed in 5.0.12.
Importing paths would cause the desktop to freeze. This has been fixed in 5.0.12.

File Synchronization

In a multi-mirror where a file was deleted on 2 or more paths the rule would incorrectly add the file back instead of deleting it from the remaining paths. This has been fixed in 5.0.12.
The verify licenses process took too long. This has been fixed in 5.0.12.
SureSync will now report undetermined license types. This has been added in 5.0.12.

Preview

Preview could encounter "failed to enable constraint" errors when increasing the items to be displayed. This has been fixed in 5.0.12.

Real-Time Monitors

Real-Time Monitors could go into a scan loop if more than 5,000 events are queued along with other unusual circumstances. This has been fixed in 5.0.12.

Scheduler

Scheduler did not always start in a timely fashion. This has been fixed in 5.0.12.

SyncCmd

SyncCmd /XStart would not always start the defined job. This has been fixed in 5.0.12.
Remote agents can now be updated using SyncCmd. This has been added in 5.0.12.

SyncStatus

Null reference exception errors could occur in SyncStatus. This has been fixed in 5.0.12.

Return to top of page

SureSync 5.0.10 Known Issues

Version 5.0.10 was posted on September 11, 2006.

Desktop

Group Folder security may be cleared when a job starts. This has been fixed in 5.0.11.

File Synchronization

History may not be updated properly in some instances for a multi-mirror. This has been fixed in 5.0.11.

Preview

Unable to override a "changed in multiple paths" error using the preview application. This has been fixed in 5.0.11.

Return to top of page

SureSync 5.0.9 Known Issues

Version 5.0.9 was posted on August 18, 2006.

Database

Database performance improvements for multi-mirror and exchanging copies rule types have been made. This improvement has been made in 5.0.10.

Desktop

Errors were reported if a user was a member of a security group which contained a quote mark. This has been fixed in 5.0.10.
Null reference errors were possible when selecting groups. This has been fixed in 5.0.10.
After saving a change in the SureSync desktop frequent changes clicking on a node could cause the desktop to ask to save changes again even if no changes were made. This has been fixed in 5.0.10.
Changing a Rule would ask if a preview should be run but it would not properly check to see if a Scheduler was running. This has been fixed in 5.0.10.
The SPIAgent Configuration Utility could not set the Multicast option properly. This has been fixed in 5.0.10.

File Synchronization

Using CRC for open files is now the default option for new Relations. If you want CRC checks to be performed on open files for an existing Relation you must specify this option manually on the Performance tab of the Relation in question. This change has been made in 5.0.10.

Preview

Run from a preview may not process all files when overrides were used. This has been fixed in 5.0.10.

Real-Time Monitors

In some instances monitor events may be lost for the local agent if a full scan is performed. This has been fixed in 5.0.10.
Unnecessary folder rescans could be triggered from a dropped path on an archive run in a real-time monitor. This has been fixed in 5.0.10.
Errors could occur when renaming folders in a multi-mirror Real-Time Monitor. This could result in the Monitor being placed on hold. This has been fixed in 5.0.10.
Change events for a Real-Time Monitor could be lost if there were multiple Intervals configured with gaps of time between them. This has been fixed in 5.0.10.

Scheduler

If the SQL service was not fully initialized when our SureSync Scheduler service attempted to start our service would not retry and would not error out which resulted in an unresponsive SureSync Scheduler service. This has been fixed in 5.0.10.
The SureSync Scheduler was not stopped before a compact was performed on an Access database. This has been fixed in 5.0.10.

Return to top of page

SureSync 5.0.8 Known Issues

Version 5.0.8 was posted on August 17, 2006.

Preview

In some instances jobs would not run when launched from the Preview panel. This has been fixed in 5.0.9.
Index out of range errors could occur when running a restore job from a preview. This has been fixed in 5.0.9.
When previewing a job which was missing a root path the Preview would not be properly notified that the job was canceled. This would result in the Preview panel becoming unresponsive. This has been fixed in 5.0.9.

SPIAgent

The SPIAgent would fail to initialize if a selected set of IP addresses is used in the SPIAgent Configuration Utility. This has been fixed in 5.0.9.

Return to top of page

SureSync 5.0.7 Known Issues

Version 5.0.7 was posted on July 31, 2006.

Alerts

Null reference errors could occur at the end of a job when trying to send an e-mail alert (if one was configured). The alert was then not sent. This has been fixed in 5.0.8.

Desktop

The SureSync desktop was unable to update Schedules or Monitors if the description field contained the "[" character. This has been fixed in 5.0.8.

File Synchronization

It was possible for "ASyncMsgSent request when request is already busy" errors to occur in some instances. This has been fixed in 5.0.8.
Duplicate key errors could occur with a Multi-Mirror. This has been fixed in 5.0.8.

Preview

Constraint errors could occur when previewing an archive or restore job. This has been fixed in 5.0.8.

Real-Time Monitors

Real-Time Monitors were unable to monitor paths local to an agent if they were represented in UNC path format. Please remember that in a Real-Time Monitor each path must be referenced using the SPIAgent on that machine. This has been fixed in 5.0.8.
Real-Time Monitors may not be restarted when a machine is rebooted in some rare cases. This has been fixed in 5.0.8.
It was possible for multi-mirror Real-Time Monitors to retain old folder names during a rename or it may not delete folder contents. This has been fixed in 5.0.8.
Change journal use was discontinued if a root path was offline when a Monitor started. This has been fixed in 5.0.8.
Monitor events could be ignored in some unusual cases, especially when clocks on the machines involved are not properly synchronized. This has been fixed in 5.0.8.
Object not set errors could occur when reconnecting a path to a Monitor. This has been fixed in 5.0.8.

Scheduler

There were problems with multiple schedulers sharing the same database. This has been fixed in 5.0.8.
The SureSync Scheduler may fail to launch in some rare cases. This has been fixed in 5.0.8.

Return to top of page

SureSync 5.0.6 Known Issues

Version 5.0.6 was posted on July 13, 2006.

Database

In some cases, converting a database with relative date ranges specified on a rule will cause an error when the job is run (or the Dates tab of the rule is displayed). Databases that have already been converted prior to this fix should be checked for valid date ranges on the Dates tab of the Rule. This has been fixed in 5.0.7.
The SureSync database could bloat in size due to a logging loop. This has been fixed in 5.0.7.

Desktop

Adding a group folder via right click causes an error #91 object reference not set to an instance of an object. This has been fixed in 5.0.7.
Fixed minor display issues. This has been fixed in 5.0.7.
Object not set errors when creating a root path could occur in some instances. This has been fixed in 5.0.7.
If local groups were used in group folder security the group membership was not being resolved correctly. This has been fixed in 5.0.7.
Group folder security "select user or group" dialog box would search only by common name and not by user name. This has been fixed in 5.0.7.
Default group folder security on the creation of a database has been modified (when the machine is a member of a domain) to be the user that creates the database, the domain administrators group, and the local administrators group. This allows you to use a local administrator account to run the Scheduler without the need for modifying security. If you want stricter security settings for your database this can be changed in the SureSync desktop after database creation. If the machine is standalone the permissions remain the user who created the database and the local administrators group. This has been fixed in 5.0.7.
User and group accounts in the security tabs were being represented in an incorrect format. This has been fixed in 5.0.7.

File Synchronization

Improved performance of multi-mirror jobs. This has been fixed in 5.0.7.
The memory requirement has been reduced for multi-mirror jobs which contain a huge number of files. This has been fixed in 5.0.7.

Real-Time Monitors

When a monitor stops due to a system shutdown it was being placed on hold instead of restarting when the system was rebooted. This has been fixed in 5.0.7.
Fixed problems with real-time monitor recovery. This has been fixed in 5.0.7.
Monitor events for publish\subscribe rules may be ignored in some instances. This has been fixed in 5.0.7.

SyncStatus

SyncStatus could produce a object not set error when canceling a job in some instances. This has been fixed in 5.0.7.

Return to top of page

SureSync 5.0.5 Known Issues

Version 5.0.5 was posted on July 11, 2006.

Database

During a database upgrade some Scheduler names would be incorrectly converted to "Unknown" on the Options tab of Schedules or Monitors. Schedules or Monitors referencing this "Unknown" Scheduler would not be started. This has been fixed in 5.0.6.

Desktop

When deleting a Rule or other object from the desktop tree, the tree may not be displayed properly until refreshed. This has been fixed in 5.0.6.
An error may be reported when a change is made on the desktop to a job while that job was starting or stopping. This has been fixed in 5.0.6.

Real-Time Monitors

New or modified Monitors were not performing a full directory scan before switching to change journal monitoring. This has been fixed in 5.0.6.

Return to top of page

SureSync 5.0.4 Known Issues

Version 5.0.4 was posted on June 23, 2006.

Desktop

Fixed a few minor display issues. This has been fixed in 5.0.5.
Loading the security user list for group folder security was taking too long with large domains. This has been fixed in 5.0.5.

File Archiving

Constraint errors may occur when previewing an archive job with an existing archive. This has been fixed in 5.0.5.
"Out of sequence" errors may occur when running an archive job from a preview. This has been fixed in 5.0.5.
"Object reference not set to an instance of the object errors occurred when trying to select a version of an archived file to restore from a preview. This has been fixed in 5.0.5.

Job Log

Errors could occur in a job log export if SureSync was using a SQL database. This has been fixed in 5.0.5.

Real-Time Monitors

Error writing queued event errors could occur if a monitor was started between intervals. This has been fixed in 5.0.5.

Scheduler

The SureSync Scheduler may loop on start or fail to start. This has been fixed in 5.0.5.
The SureSync Scheduler install process was leaving a log on the desktop. This has been fixed in 5.0.5.

SyncCmd

SyncCmd may report a constraint error when starting a job. This has been fixed in 5.0.5.

SyncStatus

Destination paths were not being displayed in SyncStatus for some jobs. This has been fixed in 5.0.5.
If job initialization timed out for a job then SyncStatus would not notify the user. This has been fixed in 5.0.5.
If a job being displayed in SyncStatus terminated unexpectedly SyncStatus would not notify the user. This has been fixed in 5.0.5.
The tree of jobs in SyncStatus was not being sorted properly. This has been fixed in 5.0.5.

Return to top of page

SureSync 5.0.3 Known Issues

Version 5.0.3 was posted on June 9, 2006

Desktop

Column length errors may occur if you exit the desktop when a rule is selected which contains many file masks. This has been fixed in 5.0.4.
Errors could occur when re-sequencing rules. This has been fixed in 5.0.4.

Database

Database security values could be lost when copying the database from Jet to SQL. This has been fixed in 5.0.4.

File Archiving

Archived files were not always being thinned evenly if created at regular intervals. This has been fixed in 5.0.4.

File Synchronization

Moving a folder and then moving it immediately back to the old location could cause the monitor to terminate only when the monitor was copying security. This has been fixed in 5.0.4.
"Entry with same key exists" errors could occur in a Relation with an unusual Rule sequence. This has been fixed in 5.0.4.

Preview

Overrides from the preview were being ignored in the root folder. This has been fixed in 5.0.4.
A constraint error could occur during a preview. This has been fixed in 5.0.4.

SPIAgent

Deltas were not being used if only a small change at the start of a file was made. This has been fixed in 5.0.4.
A SPIAgent license was sometimes incorrectly required for the local agent. This has been fixed in 5.0.4.

SyncStatus

If you try to cancel a job from SyncStatus right after selecting it in the tree, it sometimes was unable to pause or stop the job. This has been fixed in 5.0.4.
When starting a job manually from SyncStatus it was not automatically selecting the job from the tree once the job was running. This has been fixed in 5.0.4.

Return to top of page

SureSync 4.1.37 Known Issues

Version 4.1.37 was posted on January 31, 2006

File Synchronization and Archiving

If a connection was recovered too quickly after a path loss, the path may not be used. This has been fixed in 5.0.3.
Archive paths were not being monitored for path loss and were not retried properly if the path was lost. This has been fixed in 5.0.3.
If a multi-mirror rule had "copy folder security objects to existing folders" turned on then SureSync would copy security but it would always select the first path as the source even if permissions changed on a different path. This has been fixed in 5.0.3.
If a rule without *.* in the File Masks was set to "copy folder security objects to existing folders" it wasn't copying security even though it should. This has been fixed in 5.0.3.

SPIAgent

Performance improvements were made to TCP transmissions. All agents must be upgraded to benefit. This improvement can be found in 5.0.3.

Return to top of page

SureSync 4.1.36 Known Issues

Version 4.1.36 was posted on December 16, 2005.

Installer

The SureSync Scheduler Start service was not removed by the installer on uninstall. This has been fixed in 4.1.37.

Real-Time Monitors

Subfolders may not be immediately processed in a monitor if a folder is renamed. This has been fixed in 4.1.37.

Return to top of page

SureSync 4.1.35 Known Issues

Version 4.1.35 was posted on December 9, 2005.

File Synchronization

If a user is running a multi-directional Relation using UNC paths, has a large number of file retry attempts configured (which is not the default setting), and encounters the error "network path not available" the job could potentially experience a problem where SureSync creates a file with incorrect values. This has been fixed in 4.1.36.

Return to top of page

SureSync 4.1.34 Known Issues

Version 4.1.34 was posted on November 11, 2005.

Desktop

Invalid handle possible during the launch of the desktop which could result in the desktop failing to launch. This has been fixed in 4.1.35.
Minor changes made to comply with Microsoft Platform Tests for ISV Solutions. These fixes are included in 4.1.35.

Return to top of page

SureSync 4.1.33 Known Issues

Version 4.1.33 was posted on August 25, 2005.

Desktop

If a user changed servers on the Server Settings panel while a save was needed SureSync would ask if they wanted to save the changes, but if they selected yes the save would fail. This has been fixed in 4.1.34.

File Synchronization

SureSync would loop retrying database error #3709. This has been fixed in 4.1.34.

Real-Time Monitors

Root Paths could be dropped unnecessarily in rare error recovery instances. This has been fixed in 4.1.34.
Improved error recovery on temporarily lost connections. This improvement can be found in 4.1.34.

Return to top of page

SureSync 4.1.32 Known Issues

Version 4.1.32 was posted on July 15, 2005.

File Synchronization

If a stand alone Relation was run from the desktop the job log record was not being written with information to identify the Relation name in the summary. This has been fixed in 4.1.33.
A Multi-Mirror that drops a path might add files from the lost path back to the other paths when that lost path is reconnected in a later job. This has been fixed in 4.1.33.
Machines that have been running for months without a reboot could encounter a timer overflow in SureSync which can then cause other errors (for example, Type Mismatch). This has been fixed in 4.1.33.
Open files may not have been processed in rare instances. These files would be processed when they were closed. This has been fixed in 4.1.33.
SPIFiles.exe would application fault when running under Windows XP x64 edition. This has been fixed in 4.1.33.
If "Purge log entries older than" is unchecked in Tools | Options on the Reporting tab log entries would still be purged. This has been fixed in 4.1.33.

Real-Time Monitors

Priorities did not change if a Real-Time Monitor interval changed during the initial scan. This has been fixed in 4.1.33.
Attempting to run a Monitor with a Rule using wildcards in the folder may generate an error. This has been fixed in 4.1.33.

Return to top of page

SureSync 4.1.31 Known Issues

Version 4.1.31 was posted on June 3, 2005.

Desktop

If attempting to stop a monitor from the right-click popup menu or from the file menu the monitor would show as held but the job would still be running. This has been fixed in 4.1.32.

File Synchronization

False renames could be triggered in a monitor if deletes are immediately followed by adds within the same second in the same root folder. This has been fixed in 4.1.32.
FTP root paths could be incorrectly altered in some instances. This has been fixed in 4.1.32.

Return to top of page

SureSync 4.1.30 Known Issues

Version 4.1.30 was posted on May 23, 2005.

Alerts

Alerts were not being sent at the end of a job when requested. This has been fixed in 4.1.31.

File Synchronization

It was possible for file history not found errors to occur. This has been fixed in 4.1.31.
FTP could sometimes report a folder already exists error or the root path folder could be duplicated internally causing a path not found error. This has been fixed in 4.1.31.

Return to top of page

SureSync 4.1.29 Known Issues

Version 4.1.29 was posted on April 14, 2005.

Advanced Open File Support

Incorrect function errors occurred on Windows 2003 SP1 machines using Advanced Open File Support. This has been fixed in 4.1.30.

File Synchronization

Force Archive attribute on/off without copying files did not perform any action. This has been fixed in 4.1.30.
It was possible for errors to occur in determining if a root path exists. This has been fixed in 4.1.30.
When running a VBScript with a space in the path from a Schedule the script would fail to execute. This has been fixed in 4.1.30.
When copying mount points the mount point link was copied instead of the contents of the mount point. This has been fixed in 4.1.30.
With some FTP servers it was possible for part of the FTP root path to be duplicated and appended to the existing root path. This has been fixed in 4.1.30.

Real-Time Monitors

File and folder moves within a monitor resulted in copying instead of renaming. This has been fixed in 4.1.30.

SPIAgent

If remote agent communication link was broken it was possible for the local agent session to hang. This has been fixed in 4.1.30.

Return to top of page

SureSync 4.1.28 Known Issues

Version 4.1.28 was posted on March 18, 2005.

Real-Time Monitors

Real-Time Monitors would retry short file name conflicts endlessly. Now an error is logged. This has been fixed in 4.1.29.
Statistics records are now written between all monitor intervals. This change has been made in 4.1.29.

SPIAgent

Get FileSizeEx errors on Windows NT 4.0 which would prevent the SPIAgent service from starting on NT4 machines. This has been fixed in 4.1.29.

Return to top of page

SureSync 4.1.27 Known Issues

Version 4.1.27 was posted on January 12, 2005.

File Synchronization

Wrap traces now generate trace logs for errors classified as "warning" or higher. This change has been made in 4.1.28.
Importing paths into a relation with the replace option on was not replacing the old paths. This has been fixed in 4.1.28.
Importing paths into a relation made them appear in the display but they would not be active when the job was run. This has been fixed in 4.1.28.
If a path in a Relation had the option "create root folder if it doesn't exist" turned on then when the job was run it would create the folder but stop saying it doesn't exist. This has been fixed in 4.1.28.

Real-Time Monitors

In real-time monitors change events may have been dropped. This has been fixed in 4.1.28.
Alerts were not sent for a monitor when an agent went down until after the agent recovered. This has been fixed in 4.1.28.

SPIAgent

Improvements in delta performance have been made, especially with larger files. This change has been made in 4.1.28.

Return to top of page

SureSync 4.1.26 Known Issues

Version 4.1.26 was posted on November 24, 2004.

Real-Time Monitors

In some situations it was possible for the application to fail to retry the copy of an open source file in a real-time monitor. This has been fixed in 4.1.27.

SPIAgent

The SPIAgent now resets its error counter every 4 hours instead of maintaining the counter for the lifetime of the job. This prevents agents from being stopped inappropriately in some situations due to "too many errors". This has been fixed in 4.1.27.
Files were sometimes being retransmitted unnecessarily when delta processing was being used. This has been fixed in 4.1.27.

Return to top of page

SureSync 4.1.25 Known Issues

Version 4.1.25 was posted on November 4, 2004.

Database

It was possible for a loop to occur when a SQL SureSync database becomes unavailable during a file copy. This has been fixed in 4.1.26.

Desktop

The Priorities options panel will now accept European time formats for the minimum delay before copying files field. This has been fixed in 4.1.26.

File Synchronization

It was possible for the hidden attribute on the folder to be lost when folder security is copied. This has been fixed in 4.1.26.
If the Advanced Open File Support option is turned on for a rule while you are using a trial license you would not be able to turn it off after switching licenses. This has been fixed in 4.1.26.
The maximum number of errors recorded before a job is automatically stopped has become a daily counter rather than over the life of a job. This change has been made in 4.1.26.
A "parameter is incorrect" error could occur when attempting to copy security in unusual cases. This has been fixed in 4.1.26.
Overflow errors could occur when a file copy was aborted after 2GB or more of the file was trasfered. This has been fixed in 4.1.26.

Real-Time Monitors

If running multiple Relations in a monitor with different drive paths for each Relation an "folder to be monitored does not exist" error could occur. This has been fixed in 4.1.26.
Real-Time Monitors could loop on folder events (a change being detected for a folder). This has been fixed in 4.1.26.

Return to top of page

SureSync 4.1.24 Known Issues

Version 4.1.24 was posted on October 25, 2004.

Desktop

If a drive or share only was selected as a root path (no directory after it in the path specification) then the user interface would report it as not existing. This has been fixed in 4.1.25.
If you attempted to copy the same Schedule or Real-Time Monitor more than once you would receive an error and the copy would fail. This has been fixed in 4.1.25.

File Synchronization

If you have an invalid or missing path when you start a Relation with a move rule, SureSync would delete the source files as if it had synchronized the missing path correctly. This has been fixed in 4.1.25.

Real-Time Monitors

When attempting to recover a dropped path it was possible for a loop to occur on "Monitoring of path successfully restored". This has been fixed in 4.1.25.

Return to top of page

SureSync Version 4.1.23 Known Issues

Version 4.1.23 was posted on August 24, 2004.

Alerts

Alert e-mail subject lines now include the job name. This enhancement has been made in 4.1.24.
Changing the SMTP profile name in the Alerts Configuration would not change the profile name the alert user was using. This has been fixed in 4.1.24.

Database

Type mismatch errors could occurring during upgrading a database (on job log entries). This has been fixed in 4.1.24.
When copying a Relation the priority settings were not being copied. Now they will be copied if the Relation is copied in the same database. This has been fixed in 4.1.24.

File Synchronization

A synchronization would be canceled if an error occurred when setting the QoS settings for the job. This has been fixed in 4.1.24.
If running with only Backup and Restore privileges the SureSync user still needed file permissions. This has been fixed in 4.1.24.
FTP files could not be found if an "invisible" root directory was used. This has been fixed in 4.1.24.
VSS open file copies (Windows 2003) caused high virtual memory usage in the SPIAgent. This has been fixed in 4.1.24.
If the database has many jobs referencing many servers it was possible to encounter an overflow error. This has been fixed in 4.1.24.
Overflow errors could occur in SPIFiles.exe when previewing. This has been fixed in 4.1.24.
Changes to path validation routines. This improvement can be found in 4.1.24.

Real-Time Monitors

If a monitor loses a path and the end of an interval happens while we are re-trying the path the monitor would not recognize the end of the interval. This has been fixed in 4.1.24.

SPIAgent

The SPIAgent Configuration Utility could give overflow errors on machines with high uptime. This has been fixed in 4.1.24.

Return to top of page

SureSync Version 4.1.22 Known Issues

Version 4.1.22 was posted on June 9, 2004.

Alerts

In some cases pressing the Alert Users button on the Alerts option panel would fail to launch the Alert configuration tool. This has been fixed in 4.1.23.
"Alert Users" buttons on Schedules and Real-Time Monitor property sheets did not always successfully launch the Alert configuration tool. This has been fixed in 4.1.23.

Desktop

In the copy database dialog it was not possible to type in paths which included a space. This has been fixed in 4.1.23.
The job log entries for a stand alone Relation (not run by a Schedule or Real-Time Monitor) would not display the Relation name in the drop down list. This has been fixed in 4.1.23.

File Synchronization

When running under Japanese Windows jobs would crash during termination of the job. This has been fixed in 4.1.23.
An optimization has been made to the security copy process. When SureSync copies security it copies the status of the inherit flag and any explicitly set permissions. In previous versions it would then compare all of the security on the file which can be different if the inherited permissions are different on the root paths. This would result in SureSync copying security repeatedly when it was not needed. To resolve the problem SureSync now does not compare inherited permissions; only explicitly set permissions. This improvement has been included in 4.1.23.
The relation options to warn/cancel the job if there were a specified number of deletes were not working. This has been fixed in 4.1.23.
VSS is now supported on Windows 2003 machines allowing the copying of locked open files without the need for an Advanced Open File Support license. The AOFS driver and licenses are needed for locked open file copies on Windows 2000 and Windows XP. This improvement has been included in 4.1.23.

Real-Time Monitors

Real-Time Monitors could report an extraneous error "unable to signal current scan position to agent". This has been fixed in 4.1.23.
If a path was dropped from a real-time monitor and then returned to the network while the monitor was between intervals the path may not get properly restored. This has been fixed in 4.1.23.
Record is deleted errors would sometimes occur when multiple monitors are running at midnight. This has been fixed in 4.1.23.

Return to top of page

SureSync Version 4.1.21 Known Issues

Version 4.1.21 was posted on May 11, 2004.

New Feature

Advanced Open File Support. This new feature is available in 4.1.22.

Alerts

Alert configuration did not launch from the Tools menu (file not found). This has been fixed in 4.1.22.
Alert configuration did not launch from the Alerts tab in Tools | Options. This has been fixed in 4.1.22.
Alerts at the end of a schedule were not being sent. This has been fixed in 4.1.22.

Database

It is now possible to create SQL databases with a hyphen in the name. This has been fixed in 4.1.22.
Concurrency errors on Jet databases were not retried in some cases. This has been fixed in 4.1.22.
Lock files and databases for SureSync and ArchiveSync can now be stored in the same folder. This change was made in 4.1.22.
There were problems creating non-English SQL server databases. This has been fixed in 4.1.22.
It was possible to receive timeouts when copying very large databases. This has been fixed in 4.1.22.
Performance of SQL server databases has been improved. This improvement can be found in 4.1.22.

Desktop

Improvements have been made to the desktop refreshes. These improvements can be found in 4.1.22.
It was possible to receive "object variable or with block variable not set" errors when pressing the cancel button on a progress panel. This has been fixed in 4.1.22.
SPIDcom.exe produced an error attempting to get DCOM information (could not find SPISecur.dll). This has been fixed in 4.1.22.

File Synchronization

Unable to preview in Windows 2003. This has been fixed in 4.1.22.
Obsolete file history was not being purged from the database properly. This has been fixed in 4.1.22.
Unable to change an existing rule to a compare rule. This has been fixed in 4.1.22.

Real-Time

If you are running multiple monitors at once, you may get "record is deleted" errors at midnight. This has been fixed in 4.1.22.
With real-time monitors it was possible to receive "subscript out of range" errors on lost connections which occurred between intervals. This has been fixed in 4.1.22.
It was possible to receive "object variable or with block variable not set" errors when reconnecting to a path during a real-time monitor. This has been fixed in 4.1.22.

Return to top of page

SureSync Version 4.1.20 Known Issues

Version 4.1.20 was posted on March 22, 2004.

Database

With a SQL database duplicate keys on NodeID.FileName on monitor events were possible. This has been fixed in 4.1.21.

File Synchronization

Running a Relation or job from a remote client may say that the Relation is already busy. This has been fixed in 4.1.21.
If running a multi-mirror rule and a file copy was attempted to a disk without enough free space and the file already exists on that destination (not an add) then the file could be deleted. If this happened and was not corrected manually before the next run of the job then all other copies would be deleted. This has been fixed in 4.1.21.

Installer

The default install locations have been changed with this release. On new installations SureSync is installed to C:\Program Files\Software Pursuits\SureSync. The SPIAgent components are installed to C:\Program Files\Software Pursuits\SPIAgent and there is a new location in Common Files for shared components at C:\Program Files\Common Files\Software Pursuits. If you're installing 4.1.21 as an upgrade to an older version your current SureSync install location will not change but the SPIAgent and Common Files locations will be created. This change was made in 4.1.21.

Real-Time

In real-time monitors dropped paths were not always retried in a timely manner. This has been fixed in 4.1.21.
Real-time monitors may report subscript out of range or variable not set error messages. This has been fixed in 4.1.21.

SPIAgent

Wrap trace functionality has been added to the SPIAgent. This diagnostic improvement was made in 4.1.21.

Return to top of page

SureSync Version 4.1.19 Known Issues

Version 4.1.19 was posted on January 16, 2004.

Database

Log files were not being purged from the database if your database contained only real-time monitors. This resulted in some database growth. This has been fixed in 4.1.20
Lock files location and license table are now handled on a database copy. This has been fixed in 4.1.20.

Desktop

Browsing rule subfolder(s) when two root paths are the same but using different SPIAgents would work but would product an error. This has been fixed in 4.1.20.
In some instances deleting a path that explicitly specifies an agent may cause that agent server to be unmarked as an agent in Server Settings. This has been fixed in 4.1.20.

File Synchronization

Object variable or with block variable not set when unable to connect to an agent during the start of the job. This has been fixed in 4.1.20.
QOS values specified in a Priority were being ignored. QOS settings have been removed from the SPIAgent Configuration Utility. They should now be specified in Options | Priorities. This has been fixed in 4.1.20.

Real-Time Monitors

In some instances real-time monitors could enter into a timer loop on path retry. This has been fixed in 4.1.20.
An optimization was made to suppress subfolder events if we are processing the entire folder tree in real-time. This enhancement has been made in 4.1.20.

SPIAgent

SureSync would fail to reconnect to agents in some cases. This has been fixed in 4.1.20.
Remote agent threads could crash in some instances. This has been fixed in 4.1.20.

Return to top of page

SureSync Version 4.1.18 Known Issues

Version 4.1.18 was posted on December 3, 2003.

ArchiveSync

ArchiveSync restores skipped restoring of files if the folders on the destination did not exist. This has been fixed in 4.1.19.
Cache sequence errors could occur in ArchiveSync jobs. This has been fixed in 4.1.19.

Desktop

Performing a copy/paste of a relation and then altering the root paths can cause SureSync to incorrectly identify servers associates with the paths. This has been fixed in 4.1.19.

Real-Time Monitors

If a path was not available on startup of a real-time monitor an object variable not set error message would occur and cause the job to go to held status. This has been fixed in 4.1.19.
Changes in monitor interval would interrupt a full folder scan causing the folder scan to start over. This has been fixed in 4.1.19.

SPIAgent

The SPIAgent default port ranges have changed to 8002-8033 (TCP) and 8034-8065 (Multicast). This change allows for more jobs to run at once by default. If you have changed your port range using the SPIAgent Configuration Utility you will need to change these manually if you want to use the new range. All others will be updated automatically.
Chain corruption could occur in the SPIAgent due to timing errors which would cause the job to crash. This has been fixed in 4.1.19.

Return to top of page

SureSync Version 4.1.17 Known Issues

Version 4.1.17 was posted on October 22, 2003.

Database

Database tries to open and get error "SQL Error = 3050" and was not being retried. This has been fixed in 4.1.18.
Database copy did not work when commas were the default decimal separator (most European languages). This has been fixed in 4.1.18.

Real Time Monitor

Monitor may report that an SPIAgent is not running on a path when an SPIAgent was actually specified and running. This has been fixed in 4.1.18.

SPIAgent

Windows 2000 patch caused SPIAgent logons to be rejected if the Agent account was different than the user's account. Solution: place the SureSync UserID in the Local Security Policy > Act as part of the operating system.
If the monitor stops with the error "The path is not being monitored by an agent on the same machine..." a secondary error occurs "Object variable or with object variable not set". This has been fixed in 4.1.18.
Multiple agent monitor might associate dropped SPIAgent with the wrong server. This has been fixed in 4.1.18.

Return to top of page

SureSync Version 4.1.16 Known Issues

Version 4.1.16 was posted on October 2, 2003.

Desktop

Corrected a script problem that would not allow SureSync to install because the MDAC version was incorrect.

Database

Unable to Create or copy a SQL database. This has been fixed in 4.1.17.

Return to top of page

SureSync Version 4.1.15 Known Issues

Version 4.1.15 was posted on July 24, 2003.

ArchiveSync

Files with invalid created dates could cause "error thinning archive" messages when using ArchiveSync. Now files with invalid created dates are forced to the current date and time. This has been fixed in 4.1.16.

Database

SQL Server objects might have incorrect ownership values. This has been fixed in 4.1.16.
Concurrency errors with SQL Server. This has been fixed in 4.1.16

Desktop

Desktop refresh times improved and multiple requests for refresh handled more efficiently. These improvements can be found in 4.1.16.

File Synchronization

Errors when copying FTP to FTP without any non-FTP access. This has been fixed in 4.1.16.
RAS was not being fully initialized before connecting to a remote agent. This has been fixed in 4.1.16.

Real-Time Monitors

Agent may fail to immediately recognize that a monitor path has been lost. This has been fixed in 4.1.16.
Missing agent logon errors when reconnecting to dropped monitor path. This has been fixed in 4.1.16.
Some Real-Time agent errors were not recognized in a timely manner. This has been fixed in 4.1.16.
Monitor hangs saying 'Purge obsolete Job Logs'. This has been fixed in 4.1.16.

Scheduler

If a scheduler is set to run at log in and is not shut off before user logged off last SureSync will generate an error 'Scheduler is already running via DCOM' at next logon (even though it isn't). This has been fixed in 4.1.16.

SPIAgent

Path names greater than 255 characters may cause errors when using the SPIAgent. This has been fixed in 4.1.16.
Deltas suppressed on non-local drives. This has been fixed in 4.1.16.

Return to top of page

SureSync Version 4.1.14 Known Issues

Version 4.1.14 was posted on June 13, 2003.

Alerts

Alerts fail with "Failure to open database" in the Event Viewer. This has been fixed in 4.1.15.

Database

Could not update, currently locked errors when running multiple jobs. This has been fixed in 4.1.15.
Attempting to open a SQL database using a data source fails. This has been fixed in 4.1.15.
New databases were upgraded on opening SureSync for the first time. Database dialogs were omitted on certain errors. This has been fixed in 4.1.15.

Desktop

Copying a relation multiple times would fail due to SureSync not naming each copy differently. This has been fixed in 4.1.15.
New error messages when desktop cannot communicate with scheduler.
Overflow error in certain cases when clicking on a relation used only in a Real Time Monitor. This has been fixed in 4.1.15.

File Synchronization

Alternate data streams not supported error after reconnect with monitor. This has been fixed in 4.1.15.
UDF file systems for DVDs write incorrect dates. We correct the date when reading UDF systems. This has been fixed in 4.1.15.
Running a VBS script on the scripts tab would fail with an Invalid Procedure Call error. This has been fixed in 4.1.15.
In some cases when a file copy is aborted temp files are not cleaned up. This has been fixed in 4.1.15.

Real-Time Monitors

SureSync failed to warn user if agent is not used in the monitor. This has been fixed in 4.1.15.
When running a monitor with multiple relations and agents occasionally if a path becomes invalid the wrong path in the monitor was disabled. This has been fixed in 4.1.15.
Attempting to monitor a drive letter instead of a share would result in a 'could not monitor folder' error message. This has been fixed in 4.1.15.
Monitors could cancel when compressed file transmission fails with a communications error. This has been fixed in 4.1.15.

Scheduler

Scheduler terminates after 3 failures to open database even if they do not occur in a row. This has been fixed in 4.1.15 and now stops only after 3 errors in a row.

SPIAgent

Improved delta performance.
Delta blocks are now compressed with compression is enabled.
Communication with local agent could be losted when a remote connection dropped. This has been fixed in 4.1.15.

Return to top of page

SureSync Version 4.1.13 Known Issues

Version 4.1.13 was posted on May 21, 2003.

Database

Database updated to improve performance and security.
MDAC 2.7 and Jet 4.0 SP6 or newer is now required.
Optimistic Concurrency Check occurred with synchronization monitor intervals. This has been fixed in 4.1.14.
Record already exists errors could occur for an ArchiveSync real-time monitor with history. This has been fixed in 4.1.14.

Desktop

(Pause) repeats on Progress Panel title bar when cancel button is used with DCOM. This has been fixed in 4.1.14 so (Pause) is only displayed once.
Override subfolder in Preview and a file in that folder does not exist in the new source folder SureSync give "This array is fixed or temporarily locked" error. This has been fixed in 4.1.14.

File Synchronization

Failed to recognize stream support on NT4.0 systems. This has been fixed in 4.1.14.

Real-Time Monitors

Monitors can handle longer paths.
Monitors running relations using the "do not copy if top level folder does not exist" option were copying files even if the top level folder did not exist. This has been fixed in 4.1.14.
Monitors which contain multiple relations (with different number of paths) could give a "Subscript out of range" error and end the job. This has been fixed in 4.1.14.

Return to top of page

SureSync Version 4.1.12 Known Issues

Version 4.1.12 was posted on April 8, 2003.

ArchiveSync

Obsolete archive folders were being deleted. This has been fixed in 4.1.13.

Desktop

Progress panel, when run from a preview, was mis-sized. This has been fixed in 4.1.13.
Checking the box to put a monitor on hold and saying no when it asks if you would like to stop processing let the job continue but incorrectly changed status to on hold. Now keeps busy status.
If you closed the import/export path form with the 'X' in the corner an error would be generated. This has been fixed in 4.1.13.
Clicking on the desktop tree immediately after the preview (before it finishes refreshing) causes an error. This has been fixed in 4.1.13.
When copying a relation if Agents are not available, nodes, action and history tables were not created. This caused errors when attempting to run the Relation. This has been fixed in 4.1.13.
The job log would not display from the (non-DCOM) scheduler. This has been fixed in 4.1.13.
When running a job from preview and using a SQL database the progress panel would display but no files would copy. This has been fixed in 4.1.13.

File Synchronization

If the "resolve multiple updates by copying the latest" checkbox was not checked the proper warning was always issued but the file with the latest date would overwrite anyway. This has been fixed in 4.1.13.
"Failed to write all bytes" error could occur on files with alternate named data streams. This has been fixed in 4.1.13.

Real-Time Monitors

Reduced memory usage when monitoring large folders and fixed memory leaks.
May fail to retry lost path in monitor. This has been fixed in 4.1.13.
Paths lost in the middle of copying a file had errors trying to recover. This has been fixed in 4.1.13.

If you have any problems not listed here, please contact our Support Team.

Return to top of page

SureSync Version 4.1.11 Known Issues

Version 4.1.11 was posted on March 6, 2003.

Database

SQL Error on FileHistory on non-USA locales. This has been fixed in 4.1.12.
Error writing statistics outside of the USA. This has been fixed in 4.1.12.

Desktop

Progress Panel not displaying automatically. This has been fixed in 4.1.12.
Display error on the security tab of the rule. This has been fixed in 4.1.12.
If database paths contain a single Quote mark, the job log will not open the property and alert configuration utility. This has been fixed in 4.1.12.
When deleting a path that will cause a rule to be deleted we will ask before processing the delete.
If you deleted a root path which referenced an Agent the server would no longer be marked as an agent in Server Settings even though it is still used as an agent on other paths. This has been fixed in 4.1.12.
Import and export of path lists feature has been added to the current version.

File Synchronization

Improvements have been made to the scan performance and processing of large directory trees.
Errors while copying EFS (encrypted) files. This has been fixed in 4.1.12.
FTP may cause an error if "," is imbedded in the directory list. This has been fixed in 4.1.12.
"Object variable not set" error on file copy retries. This has been fixed in 4.1.12.
Folder security values did not display properly after being copied. This has been fixed in 4.1.12.
SureSync could not rename destination files on Maxtor NAS devices. This has been fixed in 4.1.12.

Licensing

Local server path move may cause a license error. This has been fixed in 4.1.12.

Real-Time Monitors

Performance improvement with large monitor queue.
Real-Time Monitor issues a "subscript out of range" error when new monitor intervals are started. This has been fixed in 4.1.12.
Errors copying permissions on reconnected monitor path. This has been fixed in 4.1.12.
Folder security values may not be set correctly. This could cause a loop in the Real-Time monitor. This has been fixed in 4.1.12.

SPIAgent

Errors if the user tries to use non-default port numbers. This has been fixed in 4.1.12.
"Not enough storage" error occurs on the write file for deltas. This has been fixed in 4.1.12.
Delta block sequence error possible with multiple destinations. Each path being different. This has been fixed in 4.1.12.
Unable to locate session by index and fails to retry path. This has been fixed in 4.1.12.

If you have any problems not listed here, please contact our Support Team.

Return to top of page

SureSync Version 4.1.10 Known Issues

Version 4.1.10 was posted on February 25, 2003.

File Synchronization

FTP error recovery fails to set folder causing a folder not found message. This has been fixed in 4.1.11.

Licensing

Get Server Info may fail on stand-a-lone workstations causing a license error. This has been fixed in 4.1.11.

Real-Time Monitors

RealTime Monitor loops if path retry occurs while processing a file or folder. This has been fixed in 4.1.11.
When a RealTime multi-directional synchronization encounters a file that includes any special characters in the file name, it will error out with the error: "Cannot insert duplicate key row" "The statement has been terminated". This error repeats until the job cancels. This has been fixed in 4.1.11.
Monitor with date range rules may skip files until job restarts. This has been fixed in 4.1.11.

SPIAgent

Improved delta performance.
"Incorrect Function - SetFilePointer" message on delta processing when copying security. This has been fixed in 4.1.11.

If you have any problems not listed here, please contact our Support Team.

Return to top of page

SureSync Version 4.1.9 Known Issues

Version 4.1.9 was posted on February 7, 2003.

Database

Fixed inability to convert SQL to JET if user altered data paths.
SQL performance improvements.

Desktop

Cosmetic changes to interface were made.

File Synchronization

File history for deleted files was not immediately deleted for non-real-time jobs, so if a file with the same name was added back before the next run SureSync would delete the file. This was fixed in 4.1.10.

If you have any problems not listed here, please contact our Support Team.

Return to top of page

SureSync Version 4.1.8 Known Issues

Version 4.1.8 was posted on January 21, 2003.

Database

Optimistic concurrency check with SQL Server failing. This has been fixed in 4.1.9.

Desktop

Always get trace level logging no matter what was requested. This has been fixed in 4.1.9.
Interval statistics now logged.

Real-Time Monitors

Multi-mirror monitor might fail to copy added file. This has been fixed in 4.1.9.
Loop on Archive thinning for Monitor when only thinning is needed. This has been fixed in 4.1.9.

SPIAgent

SPIAgent crashes randomly. This has been fixed in 4.1.9.

If you have any problems not listed here, please contact our Support Team.

Return to top of page

SureSync Version 4.1.7 Known Issues

Version 4.1.7 was posted on December 13, 2002.

Database

SQL server timeout errors. Errors on rename only and only on monitors.
SQL Server could not find the lock path with instance name causing errors.
Enhanced statistics table.
Unexpected history found when using a SQL server database when root path is deleted.
SQL duplicate key errors.

Desktop

Cosmetic changes to desktop.
Error in Copy/paste function in Relations when using SQL database.
Browse error occurs on Rule subdirectory.
When using the Restore file version override on Preview, the incorrect action was displayed

File Synchronization

If the path is not found in a schedule, reporting additional "Object variable with Block variable not set" error.
If a file mask does not end in an asterisk and the mask does not contain a period, an implied period is assumed at the end of the mask and only files or folders with no file extension are selected. If the mask ends with an asterisk (*), no implied period is assumed and files with and without extensions would be selected. To use an ending asterisk and still only select only files without file extensions, add a period after the asterisk. This behavior differs from prior releases of SureSync, which always added the implied period, even after an asterisk. With the change, syntax processing is more accurate, allowing a file mask of just “*” to select all files, with and without extensions.
FTP error. Parameter is incorrect on Set time.
Improved Archive retention periods.

Real-Time Monitors

BOF or EOF true error when renaming a folder during a Real Time Monitor.
Unable to monitor files on Win98.

If you have any problems not listed here, please contact our Support Team.

Return to top of page

SureSync Version 4.1.6 Known Issues

Version 4.1.6 was posted on November 22, 2002.

Database

When using SQL databases, and open the desktop on a different machine, busy status was getting reset.
SQL Server runs too slow and may have timeout errors.

Desktop

Preview was displaying folder icons incorrectly.
Copy/Paste of Relations from Jet to SQL was failing with no errors.

File Synchronization

Move rule is deleting source files even if copy fails, due to the Open Files Option.
Compare method now treats all paths equally - there is no source.
Archive thinning error causes overscan on archive and possible sequence error in archive.
Multi-mirror needs to select proper source path on security changes.

SPIAgent

Improved agent error recovery.
Lost connection to local agent.
"SPIAgent request when already busy" fixed.

If you have any problems not listed here, please contact our Support Team.

Return to top of page

SureSync Version 4.1.5 Known Issues

Version 4.1.5 was posted on November 20, 2002.

File Synchronization

Added a Compare function.
"Cache sequence error" when archiving Excel files. This has been fixed for version 4.1.6.

SPIAgent

Agent hangs on copy to remote agents. This has been fixed for version 4.1.6.

If you have any problems not listed here, please contact our Support Team.

Return to top of page

SureSync Version 4.1.4 Known Issues

Version 4.1.4 was posted on November 15, 2002.

File Synchronization

It was discovered in SPI testing that there is a minor chance that data was not being written correctly to the destination when Deltas are being used. The last block in the file was truncated and therefore not written. This causes the file to be corrupted. This has been fixed for version 4.1.5.

Return to top of page

SureSync Version 4.1.3 Known Issues

Version 4.1.3 was posted on October 31, 2002.

File Synchronization

Jobs may not be cancelled immediately if connection to SPIAgent is lost. This has been fixed for version 4.1.4.
Jobs may read security values when not requested to causing errors of locked permissions. This has been fixed for version 4.1.4.
Subscript out of range error if only a delete rule is in the job. This has been fixed for version 4.1.4.
Delta sequence error encountered if multiple paths, each with different older versions. This has been fixed for version 4.1.4.
Encrypted files do not get correct dates in archive. This has been fixed for version 4.1.4.
Preserving security on replaced files does not always work properly. This has been fixed for version 4.1.4.

Options Panel

Add/Change priority definition or FTP Profiles, when running with SQL database, causes an error. This has been fixed for version 4.1.4.

Monitors

Multi-relation monitors sometimes errors on internal changes. This has been fixed for version 4.1.4.

Return to top of page

SureSync Version 4.0.22 Known Issues

Version 4.0.22 was posted on September 19, 2002.

Monitor

In the previous version, a monitored path would not be scanned when the job started. This has been fixed for version 4.1.3.
Some people experienced an EOF/BOF error on monitor empty folder. This has been fixed for version 4.1.3.
If a server is specified in the Monitor option, instead of the default, to "process monitor from scheduler on" the monitor would not start and go into a "waiting to start mode". This has been fixed for version 4.1.3.
Additional work has been done in version 4.1.3 in order to recover Monitor paths that have dropped and then restored.

Scheduler

If there is database corruption or some other reason that the Scheduler can suddenly no longer access the SureSync database, in version 4.1.3 the Scheduler will shut down after three(3) retries instead of infinitely retrying. This will hopefully minimize any problems with the Jet engine throwing COM+ errors.

File Synchronization

Schedules with multiple relations may not be able to copy security after the first relation. This has been fixed for version 4.1.3.
Negative bytes copied reported on Progress form has been corrected for 4.1.3.
Windows 98 string comparison problem on special characters (trademark, copyright, etc.) has been corrected for 4.1.3.

Preview

Security compared before copying and security changes can be previewed.

Return to top of page

SureSync Version 4.0.21 Known Issues

Version 4.0.21 was posted on August 26, 2002.

Monitor

Sometimes when a Monitor attempted to open a file for copying SureSync would report "cannot locate object pointer" errors. This has been resolved in 4.0.22.
On the Monitor interval there is a filter to exclude files by file size, this filter would not always function. This has been fixed in 4.0.22.
Some people were experiencing "excessive time accessing database" on monitors that had been running for a while. This issue is no longer a problem in 4.0.22.

Desktop

Occasionally when you stop a monitor from the SureSync desktop interface, SureSync will produce a "Cannot Update Row" error. This has been fixed for version 4.0.22.
The busy/standard icons on the SureSync desktop were not properly refreshing at times. This has been resolved in 4.0.22.
On the general tab of Rule properties, if you clicked the browse button for the Rule Subfolder path when there was a path besides \ in the box, the desktop would crash. This has been fixed in 4.0.22.

Agent

Version 4.0.22 has improved recovery from WSAENOBUFS errors.

File Synchronization

If SureSync was copying to a file that was open on the destination and Delta copying was in use, the job would error out and cancel. Monitors will properly handle this situation in 4.0.22.
When running SureSync in Windows 98/ME there were some cases where unusual characters in the file name (such as the trademark symbol) caused SureSync to produce an Invalid Procedure Call and skip the file. This has been fixed for 4.0.22.

Return to top of page

SureSync Version 4.0.20 Known Issues

Version 4.0.20 was posted on July 25, 2002.

Licensing

When checking for licenses SureSync was erroneously classifying Windows 98/ME machines as servers. This was making it impossible for a workstation only license to operate on those machines. This problem has be fixed for 4.0.21.
When creating a Relation on one machine and running it on another with a workstation license, SureSync would say you needed a path on the local machine even when you had one. This has been resolved in 4.0.21.

File Synchronization

If there was a monitor running for an extended amount of time with a lot of activity SureSync would start reporting "Excessive time accessing database" errors and the file synchronization engine would sometimes be sent in